Type: Aliphatic resin emulsion
Calculated VOC: 10.7 g/LState : Liquid
Weight/gallon : 9.2 lbs.Color : YellowChalk temperature: * Approximately 50°F.
Dried Film: Translucent
Flashpoint : > 200°F.Solids : 46%Freeze/thaw stability : Stable
Viscosity : 3,200 cps
pH : 4.0Storage life : 24 months in tightly closed containers at 75°F.
*Chalk temperature indicates the lowest recommended
temperature at which the glue, air and materials can be during
application, to assure a good bond.
Bond Strength ASTM D-905 (On Hard Maple)
|
Temperature |
Strength |
Wood Failure |
|
Room Temperature |
3,650 psi |
68% |
|
150°F. Overnight |
1,250 psi |
1% |
Application Temperature
Above 50°F.
Open Assembly Time
4-6 minutes (70°F./50%RH)
Total assembly time
10-15 minutes (70°F./50%RH)
Minimum required spread
Approximately 6 mils or 250 square feet per gallon
Required clamping pressure
Enough to bring joints tightly
together (generally, 100-150 psi for softwoods, 125-175 psi for medium
woods and 175-250 psi for hardwoods)
Method of Application
Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup
Damp cloth while glue is wet. Scrape off and sand dried excess.
CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID:
If swallowed, do not induce vomiting; contact physician. If eye contact
occurs, flush with water for 15 minutes. Wash skin contact areas with
soap and water. If irritation from eye or skin contact persists, contact
physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.